Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Liste de Produits
Modèle: allipse steel tubes
marque: Huijie
Détails d'emballage: Paquet de paquets, boîte en bois
productivité: 3000 tons/month
transport: Ocean
Lieu d'origine: Zhejiang, Chine
Soutenir: 3000 tons/month
Certificats : ISO9001-2008, TS16949
Code SH: 73043190
Hafen: Shanghai,Ningbo
Type de paiement: T/T
Incoterm: FOB,CFR,CIF,FCA
JIS G3445 STKM11A STKM12C STKM13C Sided Ellipse sans soudure en acier étiré à froid Tube ovale Tubes en acier pour bague en caoutchouc automatique
tubulure mécanique
Produits: tubes en acier ellipse, tubes allipse sans soudure, tubes ovales sans soudure
Tubes mécaniques sans soudure en acier au carbone et allié
Applications: Pour la bague en caoutchouc automatique
Gamme de tailles: OD: 6-168mm WT: 1-15mm L: max12000mm
Nuance d'acier JIS G3445 STKM11A, 12C, 13C ou autres, composition chimique:
Propriétés mécaniques:
JIS3445 | C | Si | Mn | P | S | Nb or V | Tention Test | Flateniug | Bendability | ||||
Symbol |
T.S. N/mm^2 |
Y.P. N/mm^2 |
Elongation | ||||||||||
No 4,11,12 Test pe |
No 4,5 Test pe |
Distance Between Flatened Plates |
Band Angle |
Inside Radius |
|||||||||
STKM11A | 0.12 max. | 0.35 max. | 0.60 max. | 0.040 max. | 0.040 max. | . | 290 min. | . | 35 min. | 30 min. | 1/2D | 180 | 4 D |
STKM12A | 0.20 max. | 0.35 max. | 0.60 max. | 0.040 max. | 0.040 max. | . | 340 min. | 175 min. | 35 min. | 30 min. | 2/3D | 90 | 6 D |
STKM12B | 390 min. | 275 min. | 25 min. | 20 min. | 2/3D | 90 | 6 D | ||||||
STKM12C | 470 min. | 355 min. | 20 min. | 15 min. | . | . | . | ||||||
STKM13A | 0.25 max. | 0.35max. | 0.30 to 1.00 | 0.040 max. | 0.040 max. | . | 370 min. | 215 min. | 30 min. | 25 min. | 2/3D | 90 | 6 D |
STKM13B | 440 min. | 305 min. | 20 min. | 15 min. | 3/4D | 90 | 6 D | ||||||
STKM13C | 510 min. | 380 min. | 15 min. | 10 min. | . | . | . | ||||||
STKM14A | 0.30 max. | 0.35 max. | 0.30 to 1.00 | 0.040 max. | 0.040 max. | . | 410 min. | 245 min. | 25 min. | 20 min. | 3/4D | 90 | 6 D |
STKM14B | 500 min. | 355 min. | 15 min. | 10 min. | 7/8D | 90 | 8 D | ||||||
STKM14C | 550 min. | 410 min. | 15 min. | 10 min. | . | . | . | ||||||
STKM15A | 0.25 to 0.35 | 0.35 max. | 0.30 to 1.00 | 0.040 max. | 0.040 max. | . | 470 min. | 275 min. | 22 min. | 17 min. | 3/4D | 90 | 6 D |
STKM15C | 580 min. | 430 min. | 12 min. | 17 min. | . | . | . | ||||||
STKM16A | 0.35 to 0.45 | 0.40 max. | 0.40 to 1.00 | 0.040 max. | 0.040 max. | . | 510 min. | 325 min. | 20 min. | 15 min. | 7/8D | 90 | 8 D |
STKM16C | 620 min. | 460 min. | 12 min. | 7 min. | . | . | . | ||||||
STKM17A | 0.45 to 0.55 | 0.40 max. | 0.40 to 1.00 | 0.040 max. | 0.040 max. | . | 550 min. | 345 min. | 20 min. | 15 min. | 7/8D | 90 | 8 D |
STKM17C | 650 min. | 480 min. | 10 min. | 5 min. | . | . | . | ||||||
STKM18A | 0.18 max. | 0.55 max. | 1.50 max. | 0.040 max. | 0.040 max. | . | 440 min. | 275 min. | 25 min. | 20 min. | 7/8D | 90 | 6 D |
STKM18B | 490 min. | 315 min. | 23 min. | 18 min. | 7/8D | 90 | 8 D | ||||||
STKM18C | 510 min. | 380 min. | 15 min. | 10 min. | . | . | . | ||||||
STKM19A | 0.25 max. | 0.55 max. | 1.50 max. | 0.040 max. | 0.040 max. | . | 490 min. | 315 min. | 23 min. | 18 min. | 7/8D | 90 | 6 D |
STKM19C | 550 min. | 410 min. | 15 min. | 10 min. | . | . | . | ||||||
/D | 0.25 max. | 0.55 max. | 1.60 max. | 0.040 max. | 0.040 max. | 0.15 max. | 540 min. | 390 min. | 23 min. | 18 min. | 7/8D | 90 | 6 D |
1. La variation d'épaisseur ne peut pas conduire le mur hors des écarts limites concernant l'épaisseur de paroi.
2. Dans la section transversale du tuyau, l'écart par rapport à l'angle droit ne peut pas être supérieur à ± 1,5 °.
3. La courbure du tuyau ne peut pas dépasser 2 mm pour 1 m de longueur.
Les tuyaux sont produits sans réglage, dans ce cas la courbure n'est pas régulée.
Tolerances on OD |
|
Division |
Tolerance on OD |
No.1 |
under 50mm ±0.5mm
50mm or over ±1%
|
No.2 |
under 50mm ±0.25mm
50mm or over ±0.5%
|
No.3 |
under 25mm ±0.12mm
25mm or over to and excel.40mm ±0.15mm
40mm or over to and excel.50mm ±0.18mm
50mm or over to and excel.60mm ±0.20mm
60mm or over to and excel.70mm ±0.23mm
70mm or over to and excel.80mm ±0.25mm
80mm or over to and excel.90mm ±0.30mm
90mm or over to and excel.100mm ±0.40mm
100mm or over ±0.50%
|
Note 1. Pour les tubes en acier sans soudure finis à chaud, la tolérance de diamètre extérieur n ° 1 doit être appliquée.
2. La tolérance sur le diamètre extérieur des tubes trempés et revenus doit être telle que convenue par l'acheteur et le fabricant.
Tolerances on WT |
|
Division |
Tolerance on WT |
No.1 |
under 4mm +0.6mm -0.5mm
4mm or over +15%-12.5%
|
No.2 |
under 3mm ±0.3mm
3mm or over ±10%
|
No.3 |
under 2mm ±0.15mm
2mm or over ±8%
|
Groupes de Produits : Tubes en acier profilés > Tubes en acier en forme
Accueil > Liste de Produits > Tubes en acier profilés > Tubes en acier en forme > Tube ovale en acier étiré à froid sans soudure Ellipse
Envoyer Une Demande
Mr. Kevin
Numéro De Téléphone:86-0574-87491308
Fax:86-0574-84491848
Portable:+8613355844917
E-mail :sales@hjbearingtube.com
Adresse De Compagnie:Industrial Park, Zhangting Town,Yuyao City, Ningbo, Zhejiang
site mobile
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.